{"id":2174,"date":"2021-08-20T15:52:33","date_gmt":"2021-08-20T13:52:33","guid":{"rendered":"https:\/\/alexlpg.com\/jak-dziala-instalacja-lpg\/"},"modified":"2022-08-05T10:11:24","modified_gmt":"2022-08-05T08:11:24","slug":"how-does-the-lpg-installation-work","status":"publish","type":"post","link":"https:\/\/alexlpg.com\/en\/how-does-the-lpg-installation-work\/","title":{"rendered":"How does the LPG installation work?"},"content":{"rendered":"

When is it recommended to install a sequential gas installation? <\/strong><\/h3>\n

4th generation LPG <\/strong> is a vapor phase gas supply installation through electronically controlled gas injectors (operating very much like gasoline injectors). It is designed for engines with multi-point petrol injection, catalytic converter and lambda probe as well as EOBD \/ OBDII diagnostic systems, which require very precise fuel dosing.<\/p>\n

This type of installation works with most engines – both with indirect injection <\/a> and direct injection<\/a>, turbocharged or without turbines. <\/strong> Prices range from PLN 2,400 to even PLN 6,000, depending on the type of engine (direct injection requires more advanced components), number of cylinders and installation class.<\/p>\n

Sequential installation<\/a> is\u00a0the most common type of LPG installed today. The fact that the shortcomings of older generations were eliminated certainly contributed to this. When driving on a proven, properly installed LPG installation, you will not experience differences between the operation (power and dynamics) of a gas-powered engine and gasoline.<\/p>\n

\u00a0<\/h2>\n

What distinguishes a sequential gas installation from the rest ? <\/strong><\/h3>\n

The main difference between older generation gas installations and sequential installation is the use of exactly as many gas injectors as there are in the engine cylinder <\/strong>.<\/p>\n

\u00a0<\/h2>\n

The principle of operation of the sequential gas installation <\/strong><\/h2>\n

LPG filled with the filler is stored in a tank<\/strong>. Then the multivalve <\/strong> opens and releases the fuel under high pressure for a long journey. The liquid gas travels the gas line <\/strong> located under the car, flows into the gas solenoid valve<\/strong>, and after initial cleaning – into the reducer<\/strong>. At this point, evaporation takes place and the gas pressure is reduced to about 2 bar. The gas in the volatile phase goes to the volatile phase filter<\/strong>, where the second stage of cleaning from impurities takes place. Clean prepared gas goes straight to the injectors <\/strong> and finally enters the intake manifold <\/strong> (to each intake channel separately) and engine combustion chambers<\/strong>. The moment of feeding gas to individual channels of the intake manifold is the same as the sequence of engine operation on petrol. The brain of the whole operation is an advanced control computer – controller<\/strong>. As the installation director – he controls the solenoid valves, monitors gas parameters (temperature, pressure), determines the opening \/ closing times of the injectors (they can be different for separate cylinders) and ensures a smooth transition between fuel types (when you press the petrol \/ gas button). The last element is just ‘this button’ – switchboard <\/strong> installed in the driver’s cabin.<\/p>\n

\u00a0<\/h2>\n

Elements of the 4th generation gas installation<\/strong><\/h2>\n

Sequential gas injection installation (4th generation) consists of the following elements:<\/p>\n

1.The gas tank <\/span>
<\/strong> can be mounted inside or outside the vehicle. Typically, passenger cars are fitted with toroidal tanks – mounted in the spare wheel well and cylindrical tanks – mounted in the luggage compartment.<\/p>\n

2. The multivalve <\/strong> <\/span>
controls the process of refueling the gas into the tank and its flow to other parts of the system. Operation is based on simple and reliable mechanical solutions, which makes the use of the tank completely safe, even in extreme situations such as a road collision or a car fire. The tried and tested multivalve is OCTOPUS.<\/p>\n

3. Gas line <\/strong> <\/span>
thermoplastic or copper tube that connects the tank to the solenoid valve.<\/p>\n

4. Gas filler with check valve <\/strong> <\/span>
allows you to fill the tank with gas. Today, the standard is practical placement under the fuel filler flap, although some people prefer to have it in the rear bumper (often found in older LPG installations).<\/p>\n

5. A solenoid valve <\/strong> <\/span>
opens or closes the flow of liquid gas. It is installed when the reducer does not have an integrated solenoid valve. We recommend the LPG-MAX gas valve.<\/p>\n

6. Liquid phase gas filter <\/strong> <\/span>
integrated with the regulator or mounted separately. Filters liquid gas.<\/p>\n

7. Reducer (evaporator) <\/strong> <\/span>
is responsible for the gas pressure stability during engine operation. Usually comes with an integrated gas valve. Reducers are selected according to engine power.<\/p>\n

8. The volatile phase filter <\/strong> <\/span>
uses the centrifugal force of the expanded gas in the gaseous state to eliminate fine impurities and centrifuge the oily fractions present in the gas. It is mounted in front of the injectors. We use the Ultra360 \u00b0 filter known on the market in our installations.<\/p>\n

9. Mapsensor <\/strong> <\/span>
integrated gas pressure and temperature sensor. It provides data to the controller in order to make corrections to the injectors. Mapsensor PTS-01 will work here.<\/p>\n

10. LPG Injectors<\/span>
<\/strong> <\/span> injectors assembled individually or combined in a set. They inject precise doses of gas into the suction manifold channels. We recommend the flagship Barracuda or FLIPPER injectors.<\/p>\n

11. Controller<\/strong><\/span>
the brain of the entire autogas installation. Advanced computer controlling the operation of all system components. The following drivers will work great here: OPTIMA nano, OPTIMA EXPERT and OPTIMA PICO.<\/p>\n

12 . The control unit (petrol \/ gas switch) <\/span>
<\/strong> shows the current gas level in the tank and allows you to select the fuel on which the engine is to run. See RGB switch <\/a>.<\/p>\n

\u00a0<\/h2>\n

Advanced autogas technologies <\/strong><\/h3>\n

The components of the installation are armed with intelligent electronics that control the gas all the way from the tank to the engine.<\/p>\n